１, Equipment using explanation:
1.1Mainly uses in each kind of piping system by the intersection line cutting and nose hot cutting.
1.2 Suitable the material: The low-carbon steel (copper nickel tube, stainless steel pipe by plasma cutting)
2. Equipment using environment:
Temperature:-5-40℃; Humidity:≤90%; Electrical source:380V±5% 50Hz;
(Plasma need to work in:0.6-0.7Mpa.)
3. Technical norms
NO. |
Item |
techno- parameter |
1 |
cutting pipe dia |
Chuck type:Φ=50-500mm600,800,1000mm,
Rubs wheel type:Φ=50600,219-1000mm,Φ≥1000mm can be produced following customer inquiry.
Combined type with chuc and roller:Φ=50-400mm |
2 |
Thickness of cutting pipe |
δ1=6-50mm |
3 |
HYERTHERM PM1650 |
δ2=3-16mm(≤25mm) |
4 |
Length of effective cutting |
L1=2000mm×n(1≤n≤6) |
5 |
Material ellipticity |
≤1% |
6 |
Cutting speed |
V=10-3000mm/min |
7 |
Moving speed |
V0=10-6000 mm/min |
8 |
Torch swing angle(transverse) |
α=±60° |
9 |
Torch swing angle(radial) |
β=±55° |
10 |
Distance of torch car radial direction level moving: |
L2=±100mm |
11 |
Cutting torch rises and falls: |
L3=50mm |
4. Motive axle number
| AXLE |
Function |
4 axis |
5 axis (a) |
5 axis (b) |
6axis (a) |
6axis(b) |
X axis： |
Pipe rotation axis |
★ |
★ |
★ |
★ |
★ |
Y axis： |
Torch travel along pipe axis |
★ |
★ |
★ |
★ |
★ |
Z axis： |
Torch swing in axial plane |
★ |
★ |
★ |
★ |
★ |
U axis： |
Torch travel cross pipe axis |
★ |
★ |
★ |
★ |
★ |
W(a) axis： |
Torch swing in radial plane |
|
☆ |
|
★ |
|
W(b) axis： |
Torch dolly moving along the radial direction in axial plane |
|
|
☆ |
|
★ |
V axis： |
Torch upwards or downwards |
|
|
|
★ |
★ |
Measuring Axis |
Measuring using profile modeling method ;
Prevent colliding |
☆ |
☆ |
☆ |
☆ |
☆ |
5. Main cutting performance of equipment
5.1 The main cutting form divides into the seating type and the inserting type.
5.2 May cut the intersecting line hole in the main pipe or the surface in the end of intersecting line branch:
5.2.1 Intersecting line cutting machine with 4 axis can cut hold of main intersecting line tube or end surface in the end of intersecting line branch tube.
| Figure |
Intersecting line |
Figure |
Intersecting line |
|
Main tube oblique cross with branch tube |
|
Circular e tube oblique cross with obverse plank |
|
Crossing with main tube and branch tube |
|
Several branch tube crossing |
|
Main tube prejudicial cross with branch tube |
|
|
The bores are rectangle, offset, and orthogonal |
|
Tube branch is intersected with the main tube outside. |
|
Four grooves are offset and orthogonal. |
|
Cut declined to form a circle connection |
5.2.2 Intersecting line cutting machine with 5 axis(W axis included) & 6 axis can cut hold of main intersecting line tube or end surface in the end of intersecting line branch tube.
| Figure |
Intersecting line |
Figure |
Intersecting line |
|
Main tube oblique cross with branch tube |
|
The bores are rectangle, offset, and orthogonal |
|
Crossing with main tube and branch tube |
|
Inclined annulus on main tube |
|
Main tube prejudicial cross with branch tube |
|
Branch tube is intersected with the main tube outside. |
|
Four grooves are offset and orthogonal. |
|
Branch cross with ball |
|
Several branch tube crossing |
|
Round e tube oblique cross with obverse plank |
|
|
Cut pipe declined to form a circle connection |
|
☆Branch tube is intersected with the main tube inside. |
|
☆Branch tube is intersected with a spherical cover |
|
☆Branch tube is intersected with the main tube |
|
☆Branch tube is intersected with the square tube |
☆：If choice cutting, must propose option when ordering.
|
