1，Equipment structure
It is making up of decoiler, guide rack, roll forming, correction, cutting-to-length(punching), collection table, electrical control system etc.

2,Unit performance
1,Machine capacity:width≤500mm,thickness:1-2.5mm
2、Product speed: 0-15m/min
3、Total power: about35.5kw
4，Pressure:380V
5、Occupy groud area:length 18m xwidth3m

3,Each part main parameter:
1) Decoiler: decoiler,Inner expanding type,capacity:5T

2) Guide Rack:two pairs of lever rollers and four pairs of standing rollers.
Flatting number:9 sets

3)Roll forming
a ,Type:GY180
b ,Rack: Torii type,material:HT200
c,Roll forming rack:12 sets
d,The diameter of the roller axis:φ80mm, roller surface:500mm
Material: 40Cr quenching treatment HB280
e, Drive type:every rack has one gear power diatribution box.
f,Main power: 30kw frequency conversion,ZQ500 reducer
g,Material:GCr15, Quenching,Hardness:HRC58-62o
h,Assistant roller rack:4 sets

4,Adjust part:Turkey emendation type(three-dimensional emendation)

5,Cutting-to-length: Hydraulic pressure cutting