| |
The machine offers the greatest versatility covering the maximum thikness range at the best cost/production ratio. It can be used for plasma,oxy-fuel, or combined plasma and oxy-fuel cutting. This make it is a remarkably versatile machine that can meet the need of your current production but with the opportunity ot upgrade in the future if you cutting demands change.
Advantage of CNC plasma cutting machine
The machine consists of a solid reinforced main beam.This ensres perfect stiffness over the entire machine width.
The machine features a trasverse drive motor with precision rack and pinion gear ,together with backlash-free gears and drives which give high cutting and positioning speeds.
The linear guiding with AC motors ensure accurate travel of the torh carriage with smooth rapid acceleration .
The well-proven design and high build quality reduce maintenance costs and ensure a long mechanical service life.
The machine is highly versatile machine for oxy-fuel cutting and plasma.
All processes are controlled from the CNC system are also easy to use,resulting in low costs but with high productivity.
Operational Data and specifications：
Machine size(W1) 2.000,2.500,3.000,3.500mm |
Cutting with one torch(W3) 1.400,1.900,2.400,2.900mm |
Max. piercing 60mm |
Automatic Oxyfuel switching preheat, piercing, cutting |
Base rail length up to 16.000mm |
Rail height, A/B 1.020/550mm |
Cutting thickness with 1 torch 150mm |
Cutting thickness with 2 and more torches 100mm |
Recommended process speed 50-6.000mm/min |
Position speed 9.000mm/min |
Munber of tool carriages up to 4 |
Fuel gases acetylene/propane/natural gas |
Main voltage 230/50V/Hz |
Power input ~2.000VA |
Machine length 1.950mm |
Machine height(H) 1.900mm |
Cutting table height 700mm |
Machine width(W3) 2.400,2.900,3.900mm |
CNC with operator panel Left hand site |
Plasma 1torch for up to 150 A on Master |
Cutting height control Capacity for Oxy, Capacity IHS |
and AVC for Plasma cutting |
|
Plasma Cutting Machine
